Follow along as I continue the build of my N scale model railroad. In this episode I finish off with the track planning and show you the track I have laid, along with a limitation I have found with the AnyRail track planning software.
LAYOUT UPDATE: Tracking laying on Board 1 almost finished
2nd evening of track laying, and I’ve almost finished laying the track on the first board of the lower staging yard. All the turnouts are laid, and I just have a few pieces of flex track to lay. I’ll lay these once I have re-installed the board on the wall […]
LAYOUT UPDATE: Track laying starts!
I’ve finally started laying track! Tonight I laid almost half the track for the lower freight siding – so almost one of the 6ft boards. Tomorrow I will lay the track for the Metra yard on this board, and then put the two layout boards together so I can run […]
YARD DESIGN: Testing the track spacing
Nothing better than testing the track in 1:1…as I found out, the initial track plan had a flaw, where the throwbar hit the track next to it, so I had to adjust the spacing (adding in 2cm pieces of track) to move the turnouts slightly away from each other. In […]
HELIX BUILD: Wiring and track layout – Episode 8
Follow along as I continue the build of my N scale model railroad. In this episode I complete the wiring and track laying in the helix. I explain how I did the blocks for train detection and how I wired the helix. Be sure to subscribe to my YouTube channel […]
Helix completed!
Productive day today – finished the wiring of my helix and connected it to the Digitrax BXP88 block detector. Successfully ran 2 shuttle schedules using Railroad & Co, testing two locos up and down the helix. Now just to wait for the first baseboard kits to arrive and I can […]
QUICK TIP #1: Make your own KATO Unitrack Unijoiner Feeders
Quick and easy tip to make your own KATO Unitrack Unijoiner Feeders – why spend lots of money on buying Unijoiner Feeders when you can make your own in minutes..follow along and see how easy it is.
LAYOUT UPDATE: Episode 7 – helix test & track planning
Follow along as I continue the build of my N scale model railroad. In this episode I do a test of the helix using a freight and passenger train, as well as giving an update on my track planning using AnyRail. Be sure to subscribe to my YouTube channel to […]