Follow along as I continue the build of my N scale model railroad. In this episode I update you on the progress of the Level 1 boards, showing you the current proposed track plan and the plan for modelling the underpasses. Be sure to view my Facebook page, https://www.facebook.com/chicagosubnscale as […]
LAYOUT UPDATE: Episode 14 – layout build progress update
Follow along as I continue the build of my N scale model railroad. In this episode I give you another brief progress update on my layout build. Be sure to view my Facebook page as I will be adding photos and updates to that as I build my new layout. Facebook: https://www.facebook.com/chicagosubnscaleInstagram: […]
LAYOUT UPDATE: Episode 12 – The electronics under the layout
Follow along as I continue the build of my N scale model railroad. In this episode I show you the electronics that control my yard boards, including the block detectors, accessory decoders and power management. Be sure to view my Facebook page as I will be adding photos and updates […]
LAYOUT UPDATE: Track laying on second staging lower yard board
Not much done on the layout this weekend as the weather was so nice, so plenty of garden time, but I did manage to start the track laying on board two of the lower staging yard. I’ve almost finished laying the track for the Metra yard. The Freight yard will […]
LAYOUT UPDATE: Signalling
I’ve starting adding the two signals for the lower staging yard. The Metra yard does not really need one as that passenger service will be run automatically by Railroad & Co’s TrainController, but it’s nice to have anyway. I’m using SignaTrak’s SIGM20 signal controller for this as it has all […]
LAYOUT UPDATE: Episode 11 – Track Planning & Track Laying
Follow along as I continue the build of my N scale model railroad. In this episode I finish off with the track planning and show you the track I have laid, along with a limitation I have found with the AnyRail track planning software.
LAYOUT UPDATE: DCC drawer complete
I have added a drawer underneath the lower staging yard to hold the Digitrax Command Station (DCS100) and it’s power supply, my RaspberryPi which runs JMRI , the Tam Valley Depot 5A Booster for the accessory power bus and the power strip for the BDL160 & DAC20 power supplies (with […]
LAYOUT UPDATE: Board 1 of lower staging yard is finished!
It’s official…the wiring for the first lower staging yard board is finished!
LAYOUT UPDATE: Track bus & droppers installed
Well, a few days later than planned, but only a few more droppers to connect to the track bus and all will be ready for testing on the first lower staging board. Both the track buses have been installed (one for the Metra yard, one for the freight yard), connected […]
LAYOUT UPDATE: Track feeders, switch machines, block detection
Very productive Saturday! I’ve started adding the track feeders, switch machines and block detectors to the first staging yard board. So far I have added the feeders for the detected blocks (orange for the Freight yard, and yellow for the Metra yard), installed two Digitrax BDL168 block detectors (one for […]